Ram 5000 1/2 Hp, 120VAC slide gate operator Max Gate Size 40' Max Gate Weight 1000 lbs. Motor Continuous duty. 1/2 Hp, 120VAC, 50/60 hz Emergency Release chain release, Battery Back-up System, Power Inverter Dimensions H:25" - L:18 1/2" - W:16 1/2" Travel Speed 1' Per Second Ramset 5000 Slide Gate Operators or Openers Electronic Features Control Board: easy to configure solid state board with features such as L.E.D. readouts to indicate status of operator at all times Electronic Reversing Device (ERD): two separate adjustments for reversing when encountering obstruction during opening or closing; reverses for 1 second and stops Audio Alarm: audio alarm will sound for approximately six minutes, but only when the gate hits an obstruction twice; input to reset alarm included Automatic Timer: can be set from 0 to 60 seconds Maximum Running Timer: motor shuts off after 60 seconds Master/Slave: included five wire connection to synchronize movement between two gates Electronic Inputs: for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock |
Ramset 5000 Gate Operators controlled circuit board Electronic reversing sensor Will adjust to gate weight Timer can be set from 0-60 secondsMaster/Slave using 3 wires Electronic inputs for radio receiver, fire department, photocell and more MANUAL RELEASE Fail secure: crank gate to open GATE CAPACITY Maximum gate length 40' Maximum gate weight 1,000lbs.12" per second Continuous cycles duty |
|
L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Phone: 305-696-0419 Fax: 305-696-0461 |
TO VIEW COMPLETE SELECTION OF RAMSET 5000 GATE OPENERS KITS AND ACCESSORIES SCROLL DOWN |
RamSet Residential Slide Gate Opener Ram Set 5000 Sliding Gate Operator |
Ramset’s “Intelligate” Control Board works with Sliding, Swinging and Overhead vehicular gate operators. It is controlled by a program- mable microprocessor that reads and precisely executes all functions of the Control Board. The Control Board is powered by a separate mounted 24 VAC transformer. This allows no neces- sary board modifications between 110 VAC and 220 VAC single-phase applications. Some of the functions of the Control Board are: 0 - 60 seconds automatic close timer, self adjusting E.R.D. with low and high setting, constant warning, prewarning, secure close, one pass, open & close delay, left/right hand operation, plug-in loop detectors and RS485 three wire master/slave connection. |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
|
Below find the basic kit advisories, if you need help in finding other items to add to our kit selection or want to make any changes let us know. Thank you for stoping by. |