 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Welcome to: GATESNFENCES.COM
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
FAAC is the undisputed world leader in automated systems for opening gates, doors and
garage doors. We produce automatic movement operators for gates, garage doors, barriers,
rolling shutters, glazed doors, swing shutters, and access control systems, with countless
solutions for intensive, heavy commercial uses as well as for residential applications. FAAC's
hydraulic operators utilize modern technology assuring years of trouble-free, smooth and quiet
operation for even the largest gated communities. These operators have met rigorous UL-325
safety standard testing, thus reducing a community's liability.
garage doors. We produce automatic movement operators for gates, garage doors, barriers,
rolling shutters, glazed doors, swing shutters, and access control systems, with countless
solutions for intensive, heavy commercial uses as well as for residential applications. FAAC's
hydraulic operators utilize modern technology assuring years of trouble-free, smooth and quiet
operation for even the largest gated communities. These operators have met rigorous UL-325
safety standard testing, thus reducing a community's liability.
| FAAC 860 Slide Gate Operator The 860 Slide Gate Operators are compact operators with Gentle-Slide Motion Management for high-traffic applications. The 860 is designed for medium-weight gates, and the 860 is designed for heavier gates. Either operator is available with a chain drive or a rack and pinion drive. Both operators feature internal limit switches for gate leaves up to 59 ft (18 m) in length. The operators also feature internal cooling systems, interchangeable gears for various sized gates and gate speeds, and a partial opening function. The new partial opening function allows you to open the gate just enough for motorcycle traffic, for example, without compromising your security. Each operator has a die-cast anodized aluminum housing and a die-cast aluminum cover protected by polyester paint. Those mechanical components requiring extra strength are made of steel or cast iron. The motor for the 860 Operator serves as a gate lock. For further reliability, the motor's armature shaft is mounted on double bearings. The worm drive mechanism and single-plate clutch are encased in oil to lubricate their moving parts and dissipate the heat they generate during operation. Inside the operator's housing you will find that the transformer, capacitor, and analog-digital limit switch module are separate from the main control panel board for easy maintenance (see Figure 2). In addition, the control panel provides quick-connector ports. The 826 MPS control panel inside the 860 Operator offers you choices in gate leaf functions. For example, you can choose among eight different logical modes of operation. You can also select the pause time you want (from 5 to 180 sec, depending on logic mode), the direction in which the gate slides, and the operationof the warning light as the gate leaf closes. The control panel also accepts a wide range of product accessories and reversing devices to allow you the maximum flexibility in designing your gate system. One feature of FAAC's slide gate operators is the adjustable internal limit switch function. By setting the operator to recognize the fully closed and fully opened positions of the gate leaf's travel, you also enable the operator to automatically brake the gate leaf before it reaches the end of its travel in either direction, thus causing less stress on your gate leaf. |
| FAAC 860 Slide Gate Operators * 230 VAC Only * 3/4 hp motor * Internal limit switches * “Soft Stop” on opening (except partial opening) and closing * Manual release (non-keyed standard) * Selectable delayed opening and closing (to allow for warning light activation) * Microprocessor Control: Choose from 8 operating logics: * Two kinds of garage-door-like logic (signal to open, signal to close) * Two kinds of automatic logic (signal to open, then close after a selectable time period) * Two kinds of security logic (for anti-tailgating) * Two kinds of logic for an attended gate |
| FAAC 860 Slide Gate Operators Choice for 860 installation kits: Installation kits with pedestal for CHAIN DRIVEN operators 3501* and 35S1* * 30' nickel plated chain (kit 35S1 has stainless steel chain) * Mounting pedestal *8" x 10" x 5.5" NEMA 4 fiberglass enclosure with backplate and power switch * Hardware set for enclosure to pedestal attachment * 2 sets of conduit and connectors for connecting enclosure to operator * 2 caution signs Installation kits with pedestal for RACK AND PINION operators 3503* * 23' gear rack * Hardware set for enclosure to pedestal attachment * 2 sets of conduit and connectors for connecting enclosure to operator * 2 caution signs * Mounting pedestal * 8" x 10" x 5.5" NEMA 4 fiberglass enclosure with backplate and power switch |
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| ||||||||||||||||||||||
|