 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Welcome to: GATESNFENCES.COM
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0419 |
| FAAC Swing Gate Operators / Openers |
| FAAC Slide Gate Openers / Operators |
| FAAC Low Voltage Operators |
| FAAC Arm Barrier Oeprators |
| FAAC 390 24V Openers & 425 D Control Panel The Model 390 electromechanical swing gate opener is specifically designed for residential applications. The 390 is designed to primary accommodate large pillar installations. Also ideal for use on " carriage style" swinging garage doors. The self-contained 390 24v Opener consists of a irreversible electromechanical motor and articulated arm. The locking the 390 24v Operator provides in the fully opened and fully closed positions is a service device rather than a security device. |
| FAAC 415 115 VAC or 24V VDC Swing Gate Operator The Model 415 low volt operator was designed to provide power and versatility to an economical residential swing operator. The 415 Compact Operator is an automatic residential applications and can accommodate a gate leaf up to 14 ft (4.3 m) long. The self-contained 415 Compact Operator consists of an electric motor that drives a worm screw housed in an aluminum casing. The locking the 415 Operator provides in the fully opened and fully closed positions is a service device rather than a security device. |
| FAAC 740 24V Slide Gate Openers The Model 740 opener combines cutting-edge technology with sophisticated styling for single family residential applications. The 740 is perfect for single family residences: access areas of medium transit frequency. The 740 24V automated system for sliding rack pinion or chain appropriately coupled to the gate. Features: Gate automatically locks when not operating, Battery back-up is optional, "Soft stop" on opening and closing, External limits, A convenient manual release is standard. The 740-24V automated system is ideal for controlling vehicle access areas of medium transit frequency. The 740-24V automated system for sliding gates is an electro-mechanical opener transmitting motion to the sliding gate via a rack pinion or chain appropriately coupled to the gate |
| FAAC 770 Low Voltage Swing Gate Operators The Model 770 swing gate operator is designed for residential and in-ground applications. The 770 is a 24 VDC operator that features a 100% duty cycle. The 770 is an in-ground operator and can swing a gate leaf of up to 10 ft. in length and weighing up to 800 lbs. The 770 COMPACT automation system for swing gates is a geared motor. It is designed for underground installation and therefore does not alter the appearance of the leaf. The foundation box of the automation system comes ready to take an operator. The 770 electromechanical operator is irreversible, so it ensures a mechanical stop and eliminates the need to install an electric lock. |
| FAAC 400 Heavy duty Hydraulic Swing Gate Openers The Model 400 hydraulic swing gate opener is specifically designed for situations needing maximum versatility, such as certain apartment, subdivision, commercial / industrial and residential applications. It's strength also makes the 400 an excellent choice for large, ornate gates. The Model 400’s quiet, yet powerful hydraulics produce smooth and safe gate operation. It’s compact size enhances gate design. The FAAC 400 is an automatic gate opener for a swinging gate leaf. It can accommodate a gate leaf of up to 2000 lb (900 kg) and up to 20 ft (6 m) in length |
| FAAC 412 Electromechanical Swing Gate Operators The Model 412 electromechanical swing gate operator is designed specifically for light single family residential use. The Model 412 High Voltage includes One 455 D control panel which operates single leaf or bi-parting gates. The Model 412 Low Voltage includes One 425 D control panel which operates single leaf or bi-parting gates. The Model 412, like other FAAC swing gate operators, is inherently safer because it has fewer “pinch points.” In addition, the force it applies to move the gate is adjustable for extra entrapment protection |
| FAAC 402 Hydraulic Swing Gate Openers The Models 402 hydraulic swing gate opener are designed for private residences. They offer many of the benefits of a large gate operator in a compact form. The FAAC 402 Opener is an automatic gate operator for a swinging gate leaf. It can accommodate a gate leaf of up to 900 lb (410 kg) and up to 10 ft (3 m) in length. The 402 hydraulic system can hydraulically lock the gate in your choice of the opened or closed positions. The 402 system can hydraulically lock the gate in your choice of the opened and/or closed positions. Both models have versions that allow your gate system be set up to provide special options including “gate-safe” or “ gate-secure” configurations: |
| FAAC 750 In-Ground Swing Gate Openers The Model 750 hydraulic swing gate opener is designed specifically for underground installation in residential applications. Because of It’s power and invisibility, the 750 is ideal for large, ornamental gates. FAAC 750 openers is equipped with a hydraulic bypass valve for extra entrapment protection and a manual release that allows you to operate your gate if there is a power failure. A battery back-up unit is also available. The 750 offers Voltage or 115 VAC (1.5 A) or 230 VAC (1 A). The 750 Operator is an automatic gate operator for a swinging gate leaf. It can accommodate a gate leaf of up to 1760 lb (800 kg) and up to 13 ft (4 m) in length. |
| FAAC 760 Hydraulic Swing Gate Operators The Model 760 hydraulic swing gate operator is designed specifically for underground installation in residential applications. Because of It’s power and invisibility, the 760 is ideal for large, ornamental gates. The 760 offers Voltage 115 VAC (2.5 A) or 230 VAC (1.5 A). The Model 760 includes the special feature of having both the power and pump units located underground. This integrated system results in simplified installation and maintenance, plus allows you to operate the manual release from inside or outside the gate. The 760 also comes with a “soft stop” feature which slows down the gate leaf at the end of travel |
| FAAC 746 Slide Gate Openers The FAAC 746 Compact Slide Gate Opener uses GentleSlidetm Motion Management to slide gates with a pulling force of up to 35 lb (16 kg). This operator is available in two basic versions, the rack and pinion or the chain version. It comes as a package containing the drive unit and factory-wired electronic control panel inside the top cover of the unit. All external reversing devices and other accessories must be ordered separately. The control panel provides power for gate accessories of 24 VDC (pulsed or constant). The maximum recommended amperage draw for accessories should not exceed 360 milliamps. |
| FAAC 844 Slide Gate Openers The FAAC 844 Compact Slide Gate Opener is available in a rack and pinion or a chain model. It comes as a package containing the drive unit and electronic separately. The electronic control panel installed in the cover of the 844 Operator is a microprocessor-based controller that accepts a full range of product accessories and reversing devices to allow the maximum flexibility in designing the gate system. The advanced design of the opener features a small, self-contained unit composed of an electric motor with a built-in clutch and a reduction gear box, both housed in a die-cast aluminum casing. The motor drives the rack or chain to slide the gate. |
| FAAC 615 Barrier Gate Openers Big Benefits for Light - Medium Traffic Specifically designed for light - medium traffic applications, the 615 can raise beams from 6 1/2 to 13 feet (2 to 4 meters) in 3 - 8 seconds. With a 50% duty cycle, the 615 is ideal for certain residential and commercial uses with an economy opener for medium length beams. The 615 has many standard features, including hydraulic anti-crushing safety, hydraulic locking so that the beam remains secure in the opened and closed positions, and a manual release with a personalized key. Also standard is the versatile 455 D control panel. |
| FAAC 640 Hydraulic Barrier Gate Openers The Model 640 is the ideal hydraulic barrier for controlling heavy traffic at wide entrances. The 640 operates continuously, raising aluminum beams from 13 to 23 feet long in as little as 4 to 7 seconds. The 640 Barrier system is for barrier beams that are applications. The 640 Barrier can also be skirted (Aluminum Beams Only). The 640 Barriers are supplied with the FAAC 625 BLD Control Panel. The control panel allows you to select the following: Logical mode of operation, Braking time of the beam, Pause time between opening and closing. |
| FAAC 620 Hydraulic Barrier Gate Operator The Model 620 is designed specifically for traffic control applications that require extremely fast opening and closing times. When used with an aluminum beam of 8 1/2 feet or less, the 620 has an opening time of under 2 seconds and a 100% duty cycle. The 620 system controls beams that are 6-1/2 to 16 ft (2 to 5 m) in length and offers extremely fast opening and closing times. The 620 is ideal for single-lane vehicular traffic in moderate to heavy traffic. The 620 Barrier can also be articulated (jointed) for use with low overhead clearances or skirted to prevent vehicles from passing beneath the beam. Both the 620 and 640 Barriers are supplied with the FAAC 624 MPS Control Panel |
| FAAC 820 Slide Gate Operators The 820 Slide Gate Operators are compact with GentleSlide Motion Management for high-traffic applications. The 820 is designed for medium-weight gates, and the 860 is designed for heavier gates. Either operator is available with a chain drive or a rack and pinion drive. The 820 operator feature internal limit switches for gate leaves up to 59 ft (18 m) in length. The motor for the 820 or 860 Operator serves as a gate lock. For further reliability, the motor's armature shaft is mounted on double bearings. The worm drive mechanism and single-plate clutch are encased in oil to lubricate their moving parts and dissipate the heat they generate during operation. |
| FAAC 860 Slide Gate Operators The 860 Slide Gate Operators are compact with GentleSlidetm Motion Management for high-traffic applications. The 860 is designed for medium-weight gates, and the 860 is designed for heavier gates. Either operator is available with a chain drive or a rack and pinion drive. The 860 operators feature internal limit switches for gate leaves up to 59 ft (18 m) in length. The motor for the 820 or 860 Operator serves as a gate lock. For further reliability, the motor's armature shaft is mounted on double bearings. The worm drive mechanism and single-plate clutch are encased in oil to lubricate their moving parts and dissipate the heat they generate during operation. |
| FAAC 422 Hydraulic Swing Gate Operators The Models 422 hydraulic swing gate operator are designed for private residences. They offer many of the benefits of a large gate operator in a compact form. The FAAC 422 Operator is an automatic gate operators for a swinging gate leaf. It can accommodate a gate leaf of up to 900 lb (410 kg) and up to 10 ft (3 m) in length. The 402 hydraulic system can hydraulically lock the gate in your choice of the opened or closed positions. The 422 system can hydraulically lock the gate in your choice of the opened and/or closed positions. Both models have versions that allow your gate system be set up to provide special options including “gate-safe” or “ gate-secure” configurations: |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
FAAC is the undisputed world leader in automated systems for
opening gates, doors and garage doors. We produce automatic
movement operators for gates, garage doors, barriers, rolling
shutters, glazed doors, swing shutters, and access control systems,
with countless solutions for intensive, heavy commercial uses as
well as for residential applications.
opening gates, doors and garage doors. We produce automatic
movement operators for gates, garage doors, barriers, rolling
shutters, glazed doors, swing shutters, and access control systems,
with countless solutions for intensive, heavy commercial uses as
well as for residential applications.