|
|
EMX IRB-325 Infrared Photoeye Safety
Sensors
The IRB-325 photocell is an external
entrapment protection, device-type B1, non-
contact sensor for use with automatic gate
operators. The IRB-325 produces a detection
signal when the infrared beam is broken.
Benefits include:
•UL 325 compliant
•Long range
•Powder coated steel hoods
provide damage protection
|
Features
•Range: 6 to 65 feet •Power: 12V to 24V DC or AC 150mA
•Relay Contacts: 30V 1A •Housing: UL and CSA Type 4, 4X, 3, 3R, 12 13 Rating
•Dimensions: Height = 5.03”, Width = 3.06”, Depth = 3.02” •Operating Temperature: -40F to
+170F
Applications
• Complies with the UL 325 standard when used with steel hoods.
• The IRB-325 photocell is used as an external entrapment protection device
type B1 non-contact sensor for use with automatic gate operators.
• Powder coated steel hoods help protect from damage.
• The IRB-325 transmitter and receiver are mounted in line of site at a distance
of up to 65 feet.
• When the infrared beam is broken the IRB-325 produces a detection signal.
|
|
|
EMX IRB-4X Infrared Photoeye Safety
Sensors
The IRB-4X photocell is used as a safety,
reversing, or opening device in conjunction
with automatic operators. The IRB-4X will
work with any control board that accepts dry
contact on the input. The easy to install
IRB-4X is used with garage doors, rolling
doors, parking barriers and other equipment.
|
Benefits include:
•Reliability •Longer range •Improved interference rejection •Precise tuning •No focusing lens
Features
•Built in noise filter
•Power indicator LEDs
•Potentiometer range adjustment allows more precise tuning to site
•Wide 24o transmission angle allows easier alignment and increases reliability
•Through beam design is not affected by shiny surfaces
•Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt
|
|
|
EMX Retro-Reflective Photoeye NIRPlus
The NIRPlus™ retro-reflective photoeye can
be used as a reversing sensor for
commercial overhead doors, gates and
parking barriers.
Benefits include:
•Extended range for better performance in
rain and snow
•Compact design, mounting hardware and
indicators make it easy to install
|
Features
•Flexible voltage 12V AC/DC to 230V AC •Watertight package for reliable outdoor installation
•Range of operation: 45 feet •6 foot cable •2 LED indicators •Sensitivity adjustment
•Compact packaging Size: 2" high, 2" deep, 0.70" wide
•Optional protective hood available
•Bracket and mounting hardware are included
•Lower current draw of only 25mA makes it an excellent choice for solar and low voltage
applications •Watertight package and optional
protective hood offers protection for the NIRPlus™ from the elements and vandalism
•Reliability
|
|
|
Omron Safety Photo Cell
Commercial Unit Reflector
Used as a reversing sensor for commercial
overhead doors, gates, and parking barriers.
Protects by sensing person or vehicle in
danger zones. Operates at a distance up to
30'. When infrared beam is broken the NIR
produces a detection signal to stop or
reverse a door/gate. Can be used in sets to
protect all areas of entrapment. 12V/24V
AC/DC to 240V AC. Measures 2.5"x 1.5"x
.75". Requires power to one side only,
reflector requires no power.
|
SPECIFICATIONS
•Retro-reflective type
•Detecting distance: 10 m (33 ft.) with E39-R1; 12m (40 ft.) with 3-in. dia reflector
•Supply voltage: 24 to 240 VAC ± 10% 50/60 Hz; to 240 VDC ± 10%
•Power consumption: 13.75 VA max.; 3.75 W max. VDC
•Detectable object: Opaque materials, 56mm min.(with E39-R1); 80mm min (with 3-in. dia
reflector)
•Directional angle: Sensor; 0.5° to 3° ; relector: 40° min.
•Response time (max.): 30 ms
•Control output: Relay (DPDT)
•Max load: 10A 240 VAC (cosø = 1)
•Ambient temperature: Operating: -25° to 55° C (-13° F to 131° F); Storage: -30° to 70° C (-22°
F to 158° F)
•Humidity: Operating: 45 to 85% RH; Storage: 35 to 95% RH
•Degree of protection: UL Type 1; IEC144; IP67: NEAM 1, 4, 4X, 12 Indoor, 13
•Insulation resistance: 20 M Ω min. (at 500 VDC)
•Dielectric strength: 2000 VAC, 50/60 Hz for 1 minute
•Vibration: Mechanical durability: 10 to 55 Hz, 1.0 mm (.04 in.) double amplitude; Malfunction
durability: 10 to 55 Hz 1.0 mm (.04 in.) double amplitude
•Approvals: UL 325 Recognized
|
|
|
EMX P63 Infrared Photoeye
The P63 Infrared Modulated Photoeye
detects the presence of an obstacle blocking
the sensing beam for annunciation, door
control and security camera activation
|
Benefits include:
•Increased range •Reliability •Protection from dust and water splash
•Compact design
Features
•LED indicator for output •49 foot 15 meter range (19 feet more than the P45)
•Non-reflective through-beam system is not affected by shiny surfaces
•12 – 24 Volt AC/DC •2 Relays SPDT for reliability •40mA current draw
•IP 54 environmental rating •C-UL C-US and CE rated •5 Hz switching frequency
|
|
|
EMX IRB-EXP Infrared Explosive Environment
Photoswitch
Designed for explosive environments, the
rugged IRB-EXP photocell is used as a
safety, reversing, or opening device in
conjunction with automatic operators. The
IRB-EXP will work with any control board that
accepts dry contact on the input. The
easy-to-install IRB-EXP is used with garage
doors, rolling doors, parking barriers and
other equipment located in explosive
environments.
|
Benefits include:
•Easy alignment •Precise tuning •Reliability •No focusing lens
Features
•Designed to operate in areas with explosive environments.
•NEMA 4 and 7 housing
•NEC Class I, Groups B, C & D, Class II, Groups E, F & G CSA certified, CENELEC certified,
EExd IIC.
•Copper free Aluminum with Epoxy finish.
•Potentiometer range adjustment to allow more precise tuning to site.
•Through beam design is not affected by shiny surfaces.
•Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt.
•No focusing lens.
|
|
|
EMX NIR Retro Reflective Photoeye Safety
Sensors
The NIR retro-reflective photoeye can be
used as a reversing sensor for commercial
overhead doors, gates and parking barriers
|
Benefits include:
•Compact design, mounting hardware and indicators make it easy to install
•Reliability •Watertight for outdoor installation
Features
•Watertight packaging •Detection range: 30 feet •6 foot cord
•Bracket and mounting hardware Included •2 LED indicators
•Sensitivity adjustment •Compact size: 2.5" high, 1.5" deep, 0.75" wide
•Flexible voltage 12 Volt AC/DC to 240 Volt AC 40mA current draw
|
|
|
EMX Infrared Modulated Photocell IRB-4X
The IRB-4X photocell is used as a safety,
reversing, or opening device in conjunction
with automatic operators. The IRB-4X will
work with any control board that accepts dry
contact on the input. The easy to install
IRB-4X is used with garage doors, rolling
doors, parking barriers and other equipment.
|
Benefits include:
•Reliability •Longer range •Improved interference rejection
•Precise tuning •No focusing lens
Features
•Built in noise filter •Power indicator LEDs
•Potentiometer range adjustment allows more precise tuning to site
•Wide 24o transmission angle allows easier alignment and increases reliability
•Through beam design is not affected by shiny surfaces
•Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt
|
|
|
FAAC Photobeam Photoelectric Safety
Sensor Model 785163
This is the FAAC Photobeam photoelectric
safety sensor model number 785163. Range
is 100 feet. Directional, with diagonal
alignment. A safety sensor is recommended
in all gate applications and is REQUIRED for
UL-325 compliance.
|
FEATURES: •Wall Mounted or Post Mounted (add posts below!)
•Directional photocell with diagonal alignment
•Angle of detection +- 4 degrees •Range: 100 ft •Obstacle Detection Time: 10ms
•Housing Protection: IP 54 •Output Relay Rating: 100MA/24VDC
•Required power supply: 24-35 VDC available on FAAC control panels
•Output Relay: N.O. (Normally opened) & N.C. (Normally Closed)
•Dimensions: 2.75" x 3.75" x 1.75"
|
|
|
BFT DCW Photocell Safety Sensor
The BFT DCW is a safety solution for sliding
gates. Has an internal rotating lens so
installation can be adjusted 180 degrees to
solve alignment problems. Wires on one
side. Range up to 49 ft. makes it suitable for
any sliding gate
|
FEATURES •49 ft. range
•Battery powered transmitters
•Install in places impossible to wire
•Type C lithium battery lasts up to 5 years
•Low Battery Indicating LED
•Active safety edge management
•Adjustable lens
DCW RX features a battery low warning LED LD6.
|
|
|
Seco-Larm E-931-S33PRQ Polarized
Reflective Photo Eye
The transmitted IR light that the sensor emits
is polarized in a
certain direction. When shiny objects pass in
front of the
transmitted beam, they reflect light into a
polarized filter. Only light
that matches the original polarization will
pass into the receiver.
|
Features:
E-931-S33PRQ 33’ (10m) Range, Weatherproof
Specifications:
Sensing range 33’ (10m) -- Operating voltage 12 ~ 250 VAC/VDC
Current draw 50mA (max.) --- Response time 10ms (max)
Beam spread angle 1.5° --- Light source IR LED
Universal AC/DC power supply (12~250 VAC/VDC).
Weatherproof (IP66) construction for indoor/outdoor usage.
Dark ON operation. --- Bracket and mounting hardware Included.
LED alignment system.
|
|
|
EMX Photo Electric Sensors P41
The P41 Thru Beam Photoelectric Sensor
detects the presence of an obstacle if the
sensing beam is interrupted. The P41 is used
for external mounting.
|
Benefits include:
•Selectable voltage •Protected against dust and water spray
•Emitter and receiver included
Features
•Switching Distance: 35m/115 ft •Emission: Infrared
•Nominal Voltage: Receiver 12 VDC or 24 VDC •Frequency: 50/60 Hz
•Output: 2 relays UNI 8612 norms •Absorption: 70 mA
•Maximum Output Current: 1 A 28 VDC - 0.5 A 120 VAC
•Switching Frequency: 5 Hz •Start-Up Delay: 300 mS
•Protection Degree: IP 54 •Weight: 315 g
|
|
|
EMX Thru Beam Photoelectric Sensor P44
The P44 Thru Beam Photoelectric Sensor
detects the presence of an obstacle if the
sensing beam get interrupted. The P44 has
an external battery supply and is used for
external wall mountings. It can be used as a
reversing sensor for commercial overhead
doors.
|
Benefits include:
•Compact •Selectable voltage
•Water-tight design allows for outdoor installation
•Easy to use
Features
•Includes emitter, receiver and the alkaline battery for the emitter
•Nominal Voltage: Receiver 12 VDC or 24 VDC •30 foot range
•Relay Rating: 1A at 24V •Operating temperature: 14 to 149 degrees
•Response time: 30 msec •Led indicator
|
|
|
EMX Infrared Modulated PC-3
In conjunction with the automatic operator,
the PC-3 is used as a safety device for
garage doors and rolling doors.
When the infrared beam is interrupted, the
relay common and normally open contacts in
the receiver are closed. The LED indicator is
lit when the PC-3 receiver is not aligned or
when the beam is interrupted.
|
Benefits include:
• Easy installation •Reliable •Calibration not required
•Reliable •Cost effective
Features
•Works with any control board that accepts dry contact in the safety input
•Supervised relay output provides an "open" signal in case of power failure
•Non-reflective through-beam system is not affected by shiny surfaces
•Modulated infrared beam not affected by sunlight, rain, dust or dirt
•Wide detection angle: 24 degrees
•Indoor or outdoor operation of 30 feet
|
|
|
EMX Mini Infra-Red Eye BP 10
The BP 10 mini infrared eye has 33 foot
range along with advanced controls and
indicators. It may be used for door sensing,
reversing, counting, alarm entry and many
other applications acceptable to infrared
sensing. The small size of the BP 10
transmitter and receiver lenses make them
an ideal choice for
installations where the customer does not
want noticeable sensors
|
Benefits include:
•Wide variety of transmitter and receiver packaging and output options
•0.6 inch diameter lenses are less noticeable and less likely to be vandalized
•IP67 rating allows for installation in areas that might receive some rain or water splash
Features
•Stainless steel housing •IP67 rating
•Supply voltage: 10V to 30V DC, 24V AC, 115V AC
•Sensitivity adjustment •Range: 160 feet
•20 foot integral cables
•Operating temperature range: -20C to + 60C
|
