
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |

| Doorking Flush Mount Traffic Spikes - THE MODEL Doorking 1610 TRAFFIC CONTROL SPIKES are designed to allow traffic to proceed in one direction only. Stand-alone spike systems are mechanically activated and require no power for operation Individual spring loaded spikes. Doorking Traffic Spikes Flush Mount Specifications - Spring loaded or counterweight (non-spring) models available, Each spike is independently spring loaded or weighted, Available in 6' sections, Lock down option available MOUNTING: Flush, in ground unit. SPRING LOADED: Each spike is independently spring loaded with a stainless steel spring. WEIGHT SPIKES: Weighted spikes (no springs) version is also available. HOUSING: Steel housing painted bright red for easy visibility. SPEED: Maximum speed over the spikes is 5 MPH (8 KPH). Excessive speed can result in damage to the unit. (The use of speed bumps to control traffic speed is highly recommended). Stainless steel springs. Weight spikes (no springs) version available. Lock-down version available. Flush in-ground unit. Painted bright red for easy visibility. Ideal to enforce one-way traffic. Dimensions: 6.5"H x 12.5"W x 72"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist. Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage. MANUFACTURER'S COMMENTS: These spikes are quite durable for a traffic spike. The spring loaded spikes are more durable than the weighted spikes. The weighted spikes tend to break if vehicles drive too fast over the spikes (max. 5 mph speed recommended). The weighted spikes can freeze up if water fills the cavity and freezes. The biggest thing about snow is the snow plows. If a plow goes over the spike, they tend to break off bolts. Plows need to be very careful around the spikes. Doorking warranties the spikes against workmanship, however, rarely are the spikes defective. Springs typically are not covered by the warranty. All the welds and whatnot are covered. Choose the spring or weighted model according to the application for reliability. Choose the models with the lock-down feature for capability to lock the spikes in the down position to allow free entrance and exit. Doorking Surface Mount Traffic Spikes - THE MODEL 1610 TRAFFIC CONTROL SPIKES are designed to allow traffic to proceed in one direction only. Stand-alone spike systems are mechanically activated and require no power for operation. Doorking Traffif Spikes Surface Mount Specifications Modular system can accommodate any traffic lane width, Spikes are ganged 3 and 4 spikes together, Lock down allows for temporary two-way traffic, Spike sections are available in 3 and 6 foot sections. MOUNTING: Surface, concrete mount. SPRING LOADED: Each spike is independently spring loaded with a stainless steel spring. Spikes painted bright red to contrast with housing. HOUSING: Steel housing painted bright yellow for easy visibility. SPEED: Maximum speed over the spikes is 5 MPH (8 KPH). Excessive speed can result in damage to the unit. (The use of speed bumps to control traffic speed is highly recommended). End caps provide a smooth end to the spike section. Torsion springs. Lock-down standard. Surface mount unit. 1/4-inch diamond plate painted bright yellow for easy visibility. 3-inch rise provides a built-in speed bump. Dimensions: 3"H x 31"W x 36"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist. Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage. MANUFACTURER'S COMMENTS: These units with spring loaded spikes are very durable. The biggest thing to avoid is snow plows. If a plow goes over the spike, they tend to break off bolts. Plows need to be very careful around the spikes. Doorking warranties the spikes against workmanship, however, rarely are the spikes defective. Springs typically are not covered by the warranty. All the welds and whatnot are covered Speed Bumps Speed bumps are 6 foot units constructed from solid composite material. Speed bumps can be easily removed and re-installed. Maintenance Free Painted bright yellow for easy visibility. Designed for installation on concrete surfaces only. Dimensions: 2"H x 11.5"W x 72"L. THE MODEL Doorking 1610 SPEED BUMP is ideal for keeping vehicular traffic at a safe speed while driving through automated vehicular gate systems, in alleys and parking areas, and while driving over traffic control spikes. The six foot composite material speed bumps easily mount to concrete surfaces and are colored bright yellow for easy visibility. |


| DKS Traffic Control products are designed to control traffic direction and speed through a controlled entry location. Traffic spikes are used to enforce one-way lane conditions and speed bumps are used to slow traffic down through a controlled area. DKS traffic control spikes are available in surface and flush mount versions and require no power for operation. The illuminated warning sign must be used with the traffic spikes |


| Warning Signs Front and Back |
|
|
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |