DoorKing Sliding Gate Opener 9150 Commercial and
Industrial Gate Operators available in half horse and 1 hp
Industrial Gate Operators available in half horse and 1 hp
| Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. The 9150 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. |
| 15"W x 24"H x 16.5"D |
| ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. DC Powered Convenience Open (Optional). Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. |
| SPECIFICATIONS Maximum gate length 30-feet. Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.) 1/2 HP continuous-duty motor. 115, 230*, 460* VAC (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.) Operator is shipped with chain brackets and 20-feet of #40 chain. Class I, II, III and IV applications. Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions: 15"W x 24"H x 16.5"D Model 9150 with 1 HP Motor Maximum gate length 45-feet. Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.) 1 HP continuous-duty motor. 115, 230*, 460* VAC (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.) Operator is shipped with chain brackets and 20-feet of #40 chain. Class I, II, III and IV applications. Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions: 15"W x 24"H x 16.5"D |
| OPTIONS AVAILABLE WITH THESE OPERATORS DC powered convenience open. Nickel plated chain. Stainless steel chain. Plug-in loop detectors. Heater kit for cold environments. Base plate to post mount this operator (does not include posts). Surge suppressors. |
plug-in loop detectors
simplify installation and are
used for vehicle protection.
simplify installation and are
used for vehicle protection.
wired with XLPE insulated wire and are placed
in the roadway prior to concrete being poured.
in the roadway prior to concrete being poured.
Need Remote controls click on
the image for a huge selection
the image for a huge selection
Select from the top brand of
signal Receiver Click on image
signal Receiver Click on image
| Need other accessories just click Keypads Phone entry Intercom Remotes Receivers Gate Accessories |
| Doorking 9150 1/2HP Commercial Gate Opener Gate Operator $1,359.00 |
| Doorking 9150-085/230V 1/2HP Slide Gate Opener Commercial Industrial $1,649.00 Gate Operator |
| Doorking 9150-086 1/2HP Slide Commercial Gate Opener Gate Operator $1,829.00 WITH CONVINIENCE PACKAGE |
| DoorKing 9150-087/230V 1/2HP Sliding Gate Opener WITH COVINIENCE PACKAGE $2,099.00 |
| Doorking 9150-080 1HP Slide Commercial Gate Opener Gate Operator $1,699.00 |
| Doorking Slide Gate Operator 1HP 9150-081/230V 9150-088/460 $1,995.00 |
| Doorking 9150-082 1HP Convinience Package slide Gate Opener Commercial Operator $2,099.00 |
| Doorking 9150-083/230V 1HP CONVINIENCE PACKAGE Industrial Gate Operator $2,345.00 |
| Chain # 41 sold in 10 ft sections $19.95 |
| Master link for # 41 chain $2.00 |
| Heater Recommended for cold climate 1600-154 $349.00 |
| Doorking 9410-010 Plug in Loop Detector 1 Channel $147.00 |
| Doorking 9409-010 Plug in Loop Detector 2 Channel Dual $270.00 |
| Doorking 9401-061 Preformed Loop wire 24Ft circumference 50FT lead wire $99.99 |
| Doorking 9150-089/460 1HP CONVINIENCE PACKAGE Industrial Gate Operator $2,345.00 |
| Doorking 9150-090/460 1/2HP Slide Gate Opener Commercial Industrial $1,649.00 Gate Operator |
| DoorKing 9150-091/460 1/2HP Sliding Gate Opener WITH COVINIENCE PACKAGE $2,099.00 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
| L. A. Ornamental & Rack Corp3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0419 |
Welcome to: GATESNFENCES.COM
