 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Welcome to: GATESNFENCES.COM
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
A complete line of controllers, radio receivers, transmitters, and
accessories for configuring and upgrading access control systems.
Capabilities include telephone entry systems, radio-based products
for remote "keyless entry", "panic" alarms and greater handicapped
access, as well as traditional forms of access control, such as
keypads and swipe card readers.
accessories for configuring and upgrading access control systems.
Capabilities include telephone entry systems, radio-based products
for remote "keyless entry", "panic" alarms and greater handicapped
access, as well as traditional forms of access control, such as
keypads and swipe card readers.
| Linear CCM-1 Color Camera Linear Model CCM-1 (P/N ACP00904) CCTV camera can be installed inside the AE- 100, AE-500, AE-1000 or AE-2000 access control systems. The camera provides a video signal for viewing the area in front of the system. The camera is continuously powered by the access system. Focus has been factory adjusted to a range of three to four feet. The AE-1000 and AE-2000 provide a video jack for connection to a video cable with a Type “BNC” connector. Up to 400 feet of 75-ohm RG-59 video cable can be used. Longer cable runs may require the use of a video amplifier. Features Mounts inside AE-100, AE-500, AE1000Plus and AE2000Plus Field upgradeable Color CCD camera Bracket for mounting inside access controller Plug-in connector for power and video Product number: ACP00904 |
| Linear RE-BWC-1 Black and White Camera Linear’s Model RE-BWC1 (P/N ACP00886A) CCTV camera can be installed inside the RE-1 Entry System. The camera provides a video signal for viewing the area in front of the entry system The camera is continuously powered by the RE-1. The camera’s infrared light emitters illuminate the area directly on front of the entry system for nighttime or low light operation. The camera focus has been factory adjusted to a range of three to four feet. The RE -1 CAMERA jack is used to connect the camera to the main circuit board with the single-ended modular cable supplied with the camera. This cable routes power to, and video from the camera. The RE-1 VIDEO jack is for connection to a video cable with a Type “BNC” connector. Up to 300 feet of 75-ohm RG-59 video cable can be used. Longer cable runs may require the use of a video amplifier. Features Mounts inside RE-1N or RE-1SS Field upgradeable Black and white CCD camera Receives power from RE-1, no need to run additional power Contains infrared illuminators to allow visibility in complete darkness Product number: ACP00886A |
| Linear CCM-2 Color Camera Linear’s Model CCM-2 (P/N ACP00936) CCTV camera can be installed inside the RE-2 Residential Telephone Entry System. The camera provides a video signal for viewing the area in front of the entry system. The camera is continuously powered by the RE-2. The camera focus has been factory adjusted to a range of three to four feet. The CAMERA connector is used to connect the camera to the RE-2. The 4- conductor cable routes power to, and video from the camera. The VIDEO OUT connector is the camera output for connection to a video cable with a Type “BNC” connector. Up to 400 feet of 75-ohm RG-59 video cable can be used. Longer cable runs may require the use of a video amplifier. Features Mounts inside RE-2 Nickel or Stainless Steel Field upgradeable Color CCD camera Bracket for mounting inside access controller Plug-in connector for power and video Product number: ACP00936 |
| Linear CPDM-1 Video Modulator for Access Cameras The Model CPDM-1 Digital Modulator converts any baseband NTSC video and audio signal to a selected UHF or Ultraband CATV channel. A quartz crystal reference oscillator and PLL circuitry ensure drift-free performance. The modulator can be used to convert video signals from Linear's access control systems to UHF or CATV signals that can be viewed on a standard television set at the installation. The output channel number is selected using the PROGRAM button. A television connected to the modulator’s output will receive the signal when the television is tuned to the modulator’s programmed channel. Features Converts the access system's camera video signal to a UHF or CATV channel television signal A quartz crystal reference oscillator and PLL circuitry ensure drift-free performance A television connected to the modulator's output will receive the signal when the television is tuned to the modulator's programmed channel |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
| ||||||