Linear Receivers Linear RGR WOR AM-RPR Receiver Proximity Weigand

Welcome to: GATESNFENCES.COM

L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
Office: 305-696-0419
Fax: 305-696-0461

About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means,
electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com

A complete line of controllers, radio receivers, transmitters, and accessories for configuring and upgrading access
control systems. Capabilities include telephone entry systems, radio-based products for remote "keyless entry",
"panic" alarms and greater handicapped access, as well as traditional forms of access control, such as keypads and
swipe card readers.

Linear AM-RRR Remote Radio Receiver
The Model AM-RRR Remote Radio Receiver is designed for use with Linear's access control systems.
The AM-RRR functions as a remote device that extends the radio range or supplies localized radio
reception.
Three antenna types can be used with this receiver. The cabinet mounted type F connector is for
connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver's
connector. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas wire to the
receiver's antenna connector with type RG-59 cable.
An on-board RADIO RANGE knob allows adjustment of the receiver's gain. It can be set to limit the
maximum radio range that the receiver can achieve. Two indicators display the receivers performance
and operation. The two color red/green STATUS indicator lights red when the receiver is getting DC
power and turns green when access is granted to a transmitter. The RADIO indicator lights when the
receiver detects a radio signal. It can be used for trouble shooting and verifying system performance.
Receiver test points are provided for listening to the incoming signals.
The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors.
Gaskets and a weather-tight wiring strain relief seal the unit from the elements.
Features
Provides extended range for radio-based access control system
Up to 500 foot radius radio coverage
Weather-resistant housing for outside or indoor mounting
Optional directional remote or omnidirectional remote antennas
Integral radio gain control for adjustment of radio range
2-color status LEDs indicates "power on" and "access granted"
Radio LED detects transmission
Power supplied by access controller
Low voltage cable allows remote mounting without signal loss
RF frequency: 318 MHz
4.25" W x 6.25" H x 2.5" D (without antenna)
Product Number: ACP00500

Linear AM-RPR Remote Proximity Receiver
The Model AM-RPR Remote Proximity Receiver is designed for use with Linear's access control
systems. The AM-RPR functions as a remote device that supplies localized radio reception.
In a typical installation, the AM-RPR would be mounted in a plastic single-gang electrical box next to the
controlled opening. When the user requires access, their transmitter must be activated within three
inches of the AM-RPR faceplate. The ultra-short range of the AM-RPR allows placement of a unit by
each controlled opening without the possibility of the transmitter being detected by the wrong receiver.
A two-color indicator on the AM-RPR faceplate displays the receiver's status. The indicator lights red
when the receiver is getting DC power from the system and turns green when access is granted to a
transmitter.
Features
Convenient, cost-effective, and reliable form of door or entrance control
2-to-3-inch radio transmitter read range
Compatible with Linear radio-based access control systems
2-color status LED indicates "power on" and "access granted"
Installs in a single-gang electrical box
Prevents transmitter from being detected by wrong receiver
2.7" W x 4.5" H x 2" D
Product Number: ACP00560

Linear RGR Remote Genie Receiver
The Model RGR Remote Genie Receiver is designed for use with Linear's AE1000Plus, AE2000Plus, and
AM3Plus access control systems. The RGR functions as a remote device that supports reception of
Linear's GT-30 and GT-31 transmitters.
Three antenna types can be used with this receiver. The enclosure mounted type "F" connector is for
connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver's
connector. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas wire to the
receiver's antenna connector with type RG-59 cable.
Features
Receives transmitter signal and outputs proprietary signal to controller which grants or denies access
Weather-resistant housing for outside or indoor mounting
Optional directional remote or omni-directional remote antennas
Integral radio gain control for adjustment of radio range
Two-color status LEDs indicates "power on" and "access granted"
Radio LED detects transmission
Power supplied by access controller
Low voltage cable allows remote mounting without signal loss
4.25" W x 6.25" H x 2.5" D (without antenna)
Product number: ACP00745

Linear WOR Wiegand Output Receiver
The Model WOR Wiegand Output Receiver is designed for use as an access control interface for
Linear's block coded digital transmitters. The unit receives signals from transmitters, adds a facility
code to the data, and sends the information to the Wiegand input of the access control panel via a
5-wire connection.

Several transmitter and receiver options can be set using the unit's dipswitches. Three different
Wiegand output formats (26, 30, & 31-bit) are supported. Three receiver options (lockout, hold, & button
offset) can be set. Transmitter buttons on multi-button units can be selectively disabled. The facility
code is set using 16 dipswitches.

Three antenna types can be used with this receiver. The local whip antenna (supplied) screws directly
on to the receiver. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas attach
to the receiver's antenna input via RG-59 cable and a type F connector.

An on-board RADIO RANGE knob allows adjustment of the receiver's gain. It can be set to limit the
maximum radio range that the receiver can achieve. Two indicators display the receivers performance
and operation. The red RADIO indicator lights when the receiver detects a radio signal. The two color
red/green STATUS indicator lights green when the receiver is sending Wiegand data and during the
1-second post receiver lockout timer (if receiver lockout is enabled). The indicator turns red when the
receiver's HOLD input (connected to the access control panel) is active. Receiver test points are
provided for listening to the incoming signals with an audio amplifier.

The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors.
Gaskets and a weather-tight wiring strain relief seal the unit from the elements.
Features
Easy way to equip existing installations with radio transmitter access
Keyless entry offers user convenience, safety, and security for triggering gates, barrier arms, and
doors
Ideal way to facilitate handicapped access
Multi-button transmitters can double as personal emergency devices for triggering security alarms
RF input/Wiegand output receiver supports 26, 30, and 31-bit data formats
Wide selection of MegaCode (over 1 million codes) format transmitters, with available block coding
Field adjustable read range - from 5 to 500 feet
Connects as easily as card readers; transmitters are added like cards, with no software changes
required
Facility and ID codes tailored to system requirements
Weather-resistant case for mounting outdoors
RF frequency: 318 MHz
Product Number: ACP00727