 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Welcome to: GATESNFENCES.COM
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
A complete line of controllers, radio receivers, transmitters, and
accessories for configuring and upgrading access control systems.
Capabilities include telephone entry systems, radio-based products
for remote "keyless entry", "panic" alarms and greater handicapped
access, as well as traditional forms of access control, such as
keypads and swipe card readers.
accessories for configuring and upgrading access control systems.
Capabilities include telephone entry systems, radio-based products
for remote "keyless entry", "panic" alarms and greater handicapped
access, as well as traditional forms of access control, such as
keypads and swipe card readers.
| Linear AM-RPR Remote Proximity Receiver The Model AM-RPR Remote Proximity Receiver is designed for use with Linear access control systems. The AM-RPR functions as a remote device that supplies localized radio reception. In a typical installation, the AM-RPR would be mounted in a plastic single-gang electrical box next to the controlled opening. When the user requires access, their transmitter must be activated within three inches of the AM-RPR faceplate. The ultra-short range of the AM-RPR allows placement of a unit by each controlled opening without the possibility of the transmitter being detected by the wrong receiver. A two-color indicator on the AM-RPR faceplate displays the receiver's status. The indicator lights red when the receiver is getting DC power from the system and turns green when access is granted to a transmitter. Features Convenient, cost-effective, and reliable form of door or entrance control 2-to-3-inch radio transmitter read range Compatible with Linear radio-based access control systems 2-color status LED indicates "power on" and "access granted" Installs in a single-gang electrical box Prevents transmitter from being detected by wrong receiver 2.7" W x 4.5" H x 2" D Product Number: ACP00560 |
| Linear AM-PC Proximity card The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring, use with AM-PR proximity reader Features Use with AM-PR proximity reader Passive operation Low-cost Durable Sold in lots of 25 Product Number: ACP00739 |
| Linear AM-PT Proximity Tag The Model AM-PT Proximity Tag is a Wiegand format proximity type miniature access control tag with a slot for attaching to a key ring, use with AM-PR proximity reader. Features Use with AM-PR proximity reader Passive operation Small size Low-cost Durable Sold in lots of 25 Product number: ACP00742 |
| Linear AM-PR Proximity Reader • Works with both proximity tags and proximity cards. • Compatible with all Wiegand formats up to 40 bits. • Weather resistant and vandal resistant. • 4 to 6 inch read range. • Supports up to 65,000 cards. • Easy to install. • Integral LED confirms when user access is granted. For adding proximity sensing to any access control system, Linear offers the AM-PR Proximity Reader. This close-range radio-based reader works with either proximity tags (Model AM-PT) or proximity cards (Model AM- PC), both of which are slotted to attach to key rings. Upon reading a user’s tag or card, it transmits the entry data via a Wiegand output in virtually any format up to 40 bits.An integral LED confirms to the user that access is granted. The AM-PR is rugged, rated for use in extreme weather, and vandal resistant. Installation is easy — it mounts with two screws to a mullion, masonry wall, post, or nearly any surface.The unit requires 5 to 7 conductor 20 gauge shielded cable, a maximum of 500 feet.Power is supplied by the system controller The Model AM-PR Proximity Reader is designed for use with Linear's access control systems. This close-range, reader works with either proximity tags or proximity cards. The AM-PR is rugged, rated for extreme weather, and vandal resistant. Features Works with both proximity tags and proximity cards Compatible with all Wiegand formats up to 40 bits Weather resistant and vandal resistant 4 to 6 inch read range Supports up to 65,000 cards Easy to install Integral LED confirms when user access is granted 1.6" W x 3.4" H x .6" D Product Number: ACP00740 |
| Linear AM-CRI Card Reader The AM-CRI card reader interface is designed for use with Linear's access control systems. The interface will support one or two 26-bit or 31-bit Wiegand input devices. If the readers used have a hold or buffer connection, two readers may be used to the AM-CRI. If the readers do not have a hold or buffer connection, one reader may be used with the AM-CRI. Usually mounted near the readers, the AM-CRI interface connects to the control unit through a PBUS cable. Each reader connects to the AM-CRI through a six-wire (one LED in reader) or seven wire (two LEDs in reader) cable. Features For equipping a Linear access control system with one or two Wiegand devices Card Reader Interface can be used with up to two 26 or 31-Bit Wiegand input devices Power is supplied by system controller or external source for locally powered readers 4.45" W x 5.75" H x 1.5" D Product Number: ACP00717 • For equipping a Linear access control system with one or two Wiegand devices. • Card reader interface can be used with up to two 26 or 31-bit Wiegand input devices. • Power is supplied by system controller or external source for locally powered readers. To use AM-SR swipe card readers or a variety of other Wiegand devices in a Linear access control system, the AM-CRI card reader interface is required. It will support up to two 26 or 31-bit Wiegand input devices from any manufacturer, permitting easy interconnection of card readers, proximity readers, or other devices that use this industry standard. The AM-CRI interface mounts near the readers and connects to the system controller through a six-wire cable. Power is supplied to the interface and the reader or readers from the controller or an external source for locally powered readers. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| ||||||||||
| ||||||||||
| ||||||||||
| ||||||||||
| ||||||||||