 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Welcome to: GATESNFENCES.COM
| L.A. Ornamental |
Gate Openers and Operators: Power Master | Swing, Slide, Commercial, Residential,
Industrial Automatic Gate Opener, Electric Gate Opener
Industrial Automatic Gate Opener, Electric Gate Opener
| Gate Openers and Operators |
- For Use on Residential Swing Gates
(Up to 12' Wide, Max. Weight 300 lbs.) - Can be Post or Pad Mounted
- Steel Drive Arm with Manual
Disconnect - Universal Left or Right Hand Mounting
- Steel All Weather Enclosure
| 1/2 HP Instant Reversing Motor w/Thermal Overload Protection On/Off Power Switch 24V Control Circuit Board Built-In Obstruction Sensing Device Wired to Accept Radio Control, Loop Detector, Photocell, 1 Button Station and Keyswitch Can be Wired as Master/Slave (Two Operators Required) Maximum Run Timer For Use on Residential Swing Gates (Up to 12' Wide, Max. Weight 300 lbs.) Can be Post or Pad Mounted Steel Drive Arm with Manual Disconnect Positive Cam Actuated Limit Switches Universal Left or Right Hand Mounting Steel All Weather Enclosure |
| Specifications: Supply Model RSW-550F Swing Gate Operator, rated at 1/2 horse power, 115VAC., 1Ø, Operator shall be fully enclosed in a heavy gauge steel, weatherproof cabinet, primed and painted to resist corrosion. Primary reduction shall be an industrial duty V-Belt to insure quiet operation. Secondary reduction shall be heavy duty roller chain and sprocket arrangement. Final drive shaft shall be a minimum of 1" in diameter and all shafts shall be supported by maintenance free, bronze oilite bearings. An adjustable de-coupling device shall be incorporated in drive mechanism to limit force exerted by gate arm. Motor shall be of the instantly reversing type with sufficient torque to start or reverse gate from any position. Motor shall have thermal sensing overload protection. Control circuit operating voltage shall be 24 volts or less and shall provide inputs for single push button control, radio control, loop detector, external obstruction sensing device and limit switches. Limit switches shall be directly actuated by output shaft and shall not be affected by removal of motor or manual operation. Operator shall be easily converted to left or right hand swinging gates. An on/off switch shall be provided in operator to disconnect unit from power source. A separate conduit box shall be provided for field connection to power. A terminal strip shall be provided for all control connections. Units shall be easily adapted to master/slave installations without any additional parts. Gate are shall be removable for manual operation, without the use of tools. Electrical Specifications: 115V, 1Ø 1/2 HP Instant Reversing Motor w/Thermal Overload Protection (Max. Cycles per Hour 5-10) On/Off Power Switch 24V Control Circuit Built-In Obstruction Sensing Device Wired to Accept Radio Control, Loop Detector, Photocell, 1 Button Station and Keyswitch Can be Wired as Master/Slave (Two Operators Required) Maximum Run Timer Mechanical Specifications: For Use on Residential Swing Gates (Up to 12' Wide, Max. Weight 300 lbs.) Can be Post or Pad Mounted Steel Drive Arm with Manual Disconnect Positive Cam Actuated Limit Switches Universal Left or Right Hand Mounting Steel All Weather Enclosure |
| For Replacement Electronic Main Control Boards for must brands of gate openers Click Here |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| L.A.Ornamental Corp. 3708 N.W. 82nd Street Miami Florida 33147 Office: 305-696-0419 Fax: 305-696-0419 E-Mail: LAOrnamental@Aol.com |