Barrier Gates Operators Arm Tubular Parking Vehicle Gate Entry P5000

L.A. Ornamental

Features: All Made or Assemble in the U.S.A. Best Gate Openers
and Operators For Residential, Commercial Or Industrial Application.

For Replacement Electronic Main Control Boards for must brands of gate openers Click Here

Barrier Double Arm Gate Operator Wishbone Style Barrier Arm Gate Operator

The operator housing shall be weatherproof, with removable side and top with a key to prevent unauthorized entry. Housing construction to be from
sheet steel of not less than 12 gauge. All seams to be electric bead welded. Paint finish shall be baked enamel over primer.

Motor to be 1/3 HP, 115 vac, 1Ø, reversing duty type. Motor shall be instantly reversible with built in overload protection. Motor shall be resiliently
mounted for quiet operation.

Gearbox to consist of a bronze worm gear in oil bath running in roller bearings. A torque limiting clutch shall be provided on gearbox to prevent
overloading of drive mechanism. A secondary reduction shaft shall directly operate limit switches.

Secondary shaft shall be driven by heavy duty #50 roller chain and sprockets. Final drive shaft shall be minimum 1-1/4" diameter steel supported by
heavy duty roller bearings. An adjustable link shall be provided to adjust closed gate arm position parallel to ground.

Electrical assembly shall consist of a full voltage across the line contactor for motor control. A transformer shall be provided to provide control
circuit power and power auxiliary control equipment. Control circuit to be class II, not to exceed 24 volts. Control circuit to provide for full functions
and to accept radio controls, loop detectors, auto close timers and all types of access control without additional modifications. Special loop detector
control circuit shall be provided that allows for various control function without the need for specialized detectors. A pre-wired terminal strip shall be
provided for field connections.

An on/off power-switch shall be provided on operator control panel for local operation and set-up.

Wishbone gate arm shall be constructed of 1" x 6" solid wood with weight carriers and counter weights to suit arm lengths from 12' to 20'. Optional
lengths up to 26'

Electrical
Specifications:
1/3 HP, 115V, 1Ø
Instant Reversing, Continuous Duty Motor, with Overload Protection
24 VAC Control Circuit
Heavy Duty, Across the Line, Reversing Contactor
On/Off Power Switch
Open/Close Switch on Control Panel
Prewired to Accept Radio Controls, Reversing Equipment, Loop Detector Systems, Automatic Closing Timers, 7 Day Timers and Standard Control
Stations
Compatible with all Types of Access Control Equipment and Automated Systems

Mechanical
Specifications:
12' - 20' Wishbone Style Arm
12 Gauge Enclosure with Lockable Cover
45:1 Gear Reducer (Oil Bath Type)
Double Shaft Reduction System with #50 Chain and Sprockets and Roller Bearing Pillow Blocks
Adjustable Torque Limiting Clutch
Positive Cam Actuated Limit Switches
Adjustable Linkage to Set Closed Position of Gate Arm Level to Ground

Overload Protection
24 VAC Control Circuit Heavy Duty, Across the Line
On/Off Power Switch
Open/Close Switch on Control Panel
Prewired to Accept Radio Controls, Reversing Equipment, Loop Detector Systems, Automatic
Closing Timers
7 Day Timers and Standard Control Stations Compatible with all Types of Access Control
Equipment and Automated Systems
12' - 20' Wishbone Style Arm
12 Gauge Enclosure with Lockable Cover
45:1 Gear Reducer (Oil Bath Type)
Double Shaft Reduction System with #50 Chain and Sprockets and Roller Bearing
Pillow Blocks Adjustable Torque Limiting
Clutch Positive Cam Actuated Limit Switches
Adjustable Linkage to Set Closed Position of Gate Arm Level to Ground