EAGLE 200-1HP -- 2 motor working simultaneously for super heavy Gates
EAGLE 200-DM -- 2 motor - one to open gate-one to close Gate for heavy traffic
|Eagle 200 Swing Gate Opener | Eagle Commercial 200-1HP | Door Gate Operating
Device | Eagle Swing Gate Openers | Eagle 200 Swing Operators
|With three models to choose from, Eagle-200 is the reliable choice for all your commercial and industrial needs; big heavy gates with high traffic
use and smooth powerful operation.
Automatic Open/Close Delay for dual leaf gates-The precise delay is programmed in the Diamond Control Board
Partial Open, One Pass, Stop Reverse, and more . Advance Features come standard
Establish full communication between master and slave operators with only two wires. With Eagle's Global Inputs you can now connect
accessories to the master or slave operator.
2 Wire Maser/Slave - The Diamond board uses a unique Master/Slave system that requires only two wires.
One Pass - This tailgating feature works with the reverse loop to allow only one car to pass. After the car passes the gate closes instantly, if a
second car approaches the gate stops, and resumes closing once the car has left.
Stop-Reverse - This radio feature allows the transmitter to work as a three-button station and is useful for partial opening. The first command
opens the gate, the second stops the gate, and the third command will close the gate.
Timer - The adjustable timer can be set from 1 to 60 seconds, with a maximum run time of 60 seconds.
Overload - If the motor reaches the stall amp for 3 seconds, it will automatically shut down.
Receiver - The receiver terminal is mounted on the control box for easy installation and is pre-wired for a 3-wire or 4-wire receiver.
Stainless Steel Access Door - Offers full access to the control board through the locking stainless steel door.
ERD - If the gate hits an obstruction while closing, it will re-open. If it hits an obstruction while opening, it will stop, reverse 6 inches and stop
again. The sensitivity is adjustable separately for the open and close cycles.
Global Inputs - The Diamond board's Global Inputs include key switch, keypad, exit loop, phantom loop, reverse loop, edge sensor, open, stop, and
Outputs - Outputs include on board 24 VDC for MAG Lock, alarm, and 24 VAC auxiliary power.
Safety Alarm - If the gate hits an object twice while closing or opening, the system will shut down for 5 minutes. On the Diamond board you have
two options for reset mode. Selecting the off position will require a manual reset of the board if the previous happens. However, by selecting the
on position, the system will automatically reset itself.
120 VAC Power Outlets - The operator contains two 120 VAC Power Outlets for the users convenience.
Power on/off Switch - The operator has an easily accessible power disconnect switch that allows for easy installation and service.
No Pinch Arm - This safety features prohibits the arm from extending past the operator's body when the arm is in the fully extended position.
Gate Opening - Can operate to either the left or right side.
Warranty - Five Year warranty, extended to seven years if for residential use.
|The Eagle 200-1HP. This model is the workhorse of the
Eagle-200 series combining 2 1/2 horse motor working at the same
time and is the answer to heavy weight gates. This unit will easily
handle the load and cycle demands of heavy commercial gates.
|The Eagle-Power Series is a fully functional Battery Back-Up System
for a reasonable price!
Standard Commercial Operator Features include:
2 Wire Master Slave connection system, you can even use
Two 120 VAC Power Outlets for the users convenience.
Heavy Duty Gearbox for efficiency and quiet running.
One Pass Tailgating feature for safety and security.
Stop-Reverse to enable your one button Transmitter to work as a 3
Push Button Station.
Adjustable Timeer with maximum close time of 60 seconds.
Outputs including 24VDC for MAG Lock, Alarm, and 24VAC auxiliary
Accessories can be connected to either the Master or Slave Operator.
Independently adjustable Open and Close Delay for Master Slave
Power On/Off Switch for easily accessible power disconnect to allow
easy installation and service
|Specs: Cut Sheet for The Eagle
200-1HP Commercial Swing Gate
|CLICK HERE TO PURCHASE OR VIEW COMPLETE SELECTION OF EAGLE GATE OPENERS
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form
or by any means, electronic, mechanical, photocopying, or otherwise without prior 3708 NW 82nd Street Miami Florida 33147, Office:
305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com
|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147