|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can
be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without
prior written consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail:
|American Access System 11-024 or 11-024i
When price and ease of use are important, the American Access Systems, Inc. line of StandAlone Mechanical card
readers fits the bill. With no power requirement (unless optional night light is desired) or programming needed, these are
some of the simplest, yet most effective card readers available today!
Each StandAlone Mechanical card reader features a high grade stainless steel faceplate with heavy metal, powder
coated enclosure. In the middle of the faceplate is a slot for the card to slide into. There is no programming on this unit.
Simply unlock the faceplate and install the program cartridge. When a card is inserted, if the facility codes match, the gate
will open. That’s it. It’s that simple!
Since there is no programming required, an unlimited amount of cards may be used with each StandAlone Mechanical
card reader. In addition, up to three different program cartridges may be used in one reader, making this the perfect
solution for almost any low cost application.
Input: No Power Needed
Output: n/o or n/c contact
Operating temperature: -15 to 175 Fahrenheit
11-024: 5.25h x 4.75w x 4.50d
11-024i: 5.25h x 8.25w x 4.50d
Intercom: 8 ohm Mylar speaker w/ call button
Unlimited card capability
No power needed
Night Light available (12 VAC required)
Limited two year warranty
Optional intercom available
Optional camera available
Reads up to three codes simultaneously