
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0419 |
|
| Diablo Loop Detector DSP 50 Kit -- Available in ( 75 feet and 100 feet ) Exit Device - Probe & Detector |
|
| Vehicle Magnitomitor Probe Kit w/100' of lead-in FEATURES The Diablo DSP-50 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications. This device will work when connected to an embedded street loop or, (with a switch setting) the device will operate with a Mini-Loop available from Diablo Controls. The Diablo Controls Mini-Loop is a small pipe shape device-approximately 5" by 3/4” and is designed to be buried in the ground to detect vehicles. The Diablo DSP-50 that comes with this kit when attached to the Probe MUST ONLY BE USED AS A FREE EXIT DEVICE as it gives a pulse output only. SENSITIVITY SWITCH This detector has a 10 position rotary sensitivity switch. The unit is shipped in the “5”position which is the normal sensitivity level. Sensitivity can be adjusted up and down from this level to accommodate different street loops or “MiniLoops”. Operating Temperature - -35°F to 165°F (-37°C to 74°C) Power - 10 to 30 Volts D.C. ( 30 Ma. Max at 12 Volts) Enclosure - Impact resistant, high temperature plastic. H - 2.375i (60.4 mm) W n 0.86i (22 mm) D -2.25 i (58mm) |
| Loop detectors and loops may be used for a variety of applications. Vehicle loop detectors are frequently used to provide free entrance and/or free exit for traffic. Wire loop detector directly to gate operator or overhead door, connect to buried loop, and allow larger metal objects which drive over loop to trigger the gate or door to open, or close. Loops remain practically invisible, buried beneath gravel, asphalt, or concrete driveways. Vehicle loop detectors are a safe and reliable way of controlling an assortment of equipment. Safety Devices for Automated Gates and Doors: Vehicle loops and loop detectors are also frequently used as safety devices. Loop detectors are wired directly to the gate operator or overhead door. Loops are buried directly under the automated gate or door. When a vehicle, or other large metal device, is present, a signal is sent preventing the automated gate or door from moving. Use vehicle loop detectors and loops in conjunction with other safety devices |


| Diablo Loop Detectors |
| EDI Loop Detectors |
| Reno Loop Detectors |
| EMX Loop Detectors |
| Preform Loops |






| The DSP-50 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications. This device will work when connected to an embedded street loop or, (with a switch setting) the device will operate with a MiniLoop available from Diablo Controls. The Diablo Controls Mini-Loop is a small “pipe shaped” device-approximately 5” by 3/4” and is designed to be buried in the ground to detect vehicles. Contact Diablo Controls for more information. The DSP-50 can be used as either a safety loop or free exit loop detector. With the flexibility to be either “fail safe” or “fail secure,” it is the most “user friendly” detector on the market today. The Diablo DSP-50 that comes with this kit when attached to the Probe MUST ONLY BE USED AS A FREE EXIT DEVICE as it gives a pulse output only. |
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |