 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Welcome to: GATESNFENCES.COM
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
| Multi-Code 302101 2-Channel Heavy-Duty Gate Receiver is designed for use in gate operator applications. The receiver is housed in a heavy-duty metal cabinet. The cabinet meets NEMA 13 and JIC specifications and features a sealed strain relief bushing for wiring |
| ||||||||||
| Multi-Code 302101: 2-Channel Heavy Duty Gate Receiver MULTI-CODE 302101: 2-Channel Heavy Duty Gate Recvr The Model 302101 2-Channel Heavy-Duty Gate Receiver is designed for use in gate operator applications. The receiver is housed in a heavy-duty metal cabinet. The cabinet meets NEMA 13 and JIC specifications and features a sealed strain relief bushing for wiring. The Model 302101 is compatible with 300 MHz Multi-Code transmitters only. Features Operates on 24 volts AC or DC power Two channels Whip antenna 512 codes set by dipswitch RF frequency: 300 MHz 6" W x 8" H x 4" D Order number: MCS302101 An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. An external Model 106603 Remote Whip Antenna can also be used with this receiver in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. The operator supplies 24 volt AC or DC power to the receiver. The two Form C relay outputs can switch up to 1 amp @ 30 VAC. The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator. Transmitter switch #10 selects which receiver channel will activate. |
