|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be
reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written
consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com
|Multi-Code 109020 1-Channel Receiver is designed for use in residential garage
door operator applications. Typically the receiver mounts directly to the three
terminals on the door operator. An 11-inch wire antenna extends from the
|Multi-Code 109020: 1-Channel Receiver
The Model Multi-code 109020 1-Channel Receiver is designed for use in residential garage door operator applications.
Typically the receiver mounts directly to the three terminals on the door operator. An 11-inch wire antenna extends
from the receiver.
The operator supplies 24-volt power to the receiver, or the receiver can be powered by a separate 24-volt AC power
transformer. Remote power accessories available for the Model 109020 include the Model 109201 Wiring Harness and
the Model 109207 Wiring Harness. Both models include a plug-in transformer.
The receiver's exclusive two-way terminal lugs fit under terminal screws or can be used with push-on terminals in
remote placement applications using the Model 109206 3-Wire Adapter.
The receiver is programmed with a 10-position coding switch. When a Multi-Code transmitter set to the same code is
activated, the receiver's output will activate, triggering the door operator.
The Model Multi-Code 109020 is compatible with 300 MHz Multi-Code transmitters only.
Operates on 24 VAC power
RF frequency: 300 MHz
3" W x 5.5" H x 1.5" D
Order number: MCS109020