
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |


| Liftmaster ML100, MLK100, or MLRPT Missing Link Wireless Weigand Data System Introducing a new age of flexibility and scalability in design, development, integration and installation of Wiegand-based access control systems. The “Missing Link” has been designed to eliminate the need for costly structured cabling connecting your system’s Wiegand components. “Missing Link” products offer a simple, inexpensive, yet extremely sophisticated solution for implementation of a self-healing wireless network that can handle perimeters and facility footprints covering large areas, with choices of installation to meet any needs, starting from single entry, to 16-channel wireless, to discrete modules, up to an unlimited number of active access points, and single or multiple control receivers – all without signal crashing or interference issues. Completely wireless, these devices allow for the utmost in flexibility in the initial design, with scalability to meet enterprising project demands. “Missing Link” just takes minutes to connect. Simply attach any 3-wire Wiegand device (card reader, keypad, biometric, receiver, transceiver, barcode scanner or controller) to the input terminals on the “transmit” unit, and connect any 3-wire Wiegand control device to the output terminals on the “receive” unit, and you will have established a wireless path for your Wiegand signal, regardless of the bitstream protocol. Due to this patent-pending protocol, which automatically adjusts the devices to any version of Wiegand signal, the Missing Link requires no adjustment of any kind to fit the system. • Eliminates All Structured Cabling • Long Range yet Ultra-Low Power Consumption • Available in Point-to-Point, Multi-Channel and Multiplexed • Immune to Lightning • Highly Encrypted Communication Technology “Missing Link” opens doors. Simply attach the 2-wire relay output from your control source to the input terminals on the “receive” unit, and attach your 2-wire relay input from your access point (door strike, maglock, door opener, gate operator, barrier gate operator, crash barrier, turnstile or man-trap) to the output terminals on the “transmit” unit, and you will have completed your control loop for a single access point in minutes! An unlimited number of access points can be enrolled into the network, and repeaters can be used to create “self-healing” redundancies that will cover footprints up to 1.5 square miles. “Missing Link” is also available in this 16- channel configuration, with 16 outputs which wire to the control unit and 16 units to receive “door open” commands from the controller and automatically and wirelessly send such commands to the appropriate entrance. “Missing Link” is the only product made which automatically determines the protocol and parameters of the inputs, lessening installer error. Specifications: “MISSING LINK” REPEATER TECHNOLOGY IS OPTIONALLY USED TO: Increase Range by up to ½ Mile Penetrate Walls and Obstacles Generate a “Self-Healing” Network Increase Robustness Offer Additional Radio Penetration Paths Make the System Further Immune to Noise Up to 8 Repeaters Can Be Easily Programmed and Installed per Site System Covers up to a 2 Square Mile Area Using 8 Repeaters Operates on External 8~24V AC or DC or Internal AA Batteries for up to 2 Years; Batteries May Also Be Used As Power Backup Repeaters Are Fully Supervised and Report Low Battery Conditions ADDITIONAL DATA Environmental: -40 to 176°F (-40 to 80°C), 100% Humidity, Condensing Stability: 5 PPM in the Stated Temperature Range with Less Than 5 PPM Aging per Year Power: - Repeaters: External 8~24V AC/DC or Internal 4 AA Alkaline or Photo Lithium 1.5V Batteries, 150uA Averaged - ML Modules: 10~24V AC/DC or Internal 4 AA Alkaline or Photo Lithium 1.5V Batteries, 100uA Averaged - ML-16 Board: 8~24V AC/DC, 30mA Averaged Radio: Unlicensed 905-930MHz, 125 Channels, Narrowband and Automatic Channel Selection; Fully Digital Security: Proprietary Digital Security Algorithms with Code Changing 60-Bit Security Protocol MLK100 KEYPAD SPECS Completely Wireless No Onboard Relay Operates for up to 2 Years on (4) AA Batteries UV Hardened ABS Enclosure Pedestal or Surface Mount Invisible to Lightning Backlight on Motion Protocol “Cloning” Audible Confirmation Integrated Transceiver with ½ Mile Range Secure Digital Encryption Field Adjustable Wiegand Bit Format USA Designed and Made |
|
|
| BFT Cell Phone Entry with Keypad up to 1000 User -- Open Your Gate From any where in the world Click here |