| All of this Gates Design: Driveway Gates can be made of Aluminum or Wrought Iron, Sliding or Swing, Manual or Automatic, for Electric Gate Openers look on the side Menu. Matching Garden Gates Design and Entrance Gates are available also Picket Fences, Pool Fence, Ornamental Fence are made to match all Driveway Gates. The plate on the bottom Adds to the Gate Design and keep your Pet Safe. |

| Gate Design | Driveway Gate Design | Aluminum Driveway Gates Design Wrought Iron Driveway Gates |
| European Fan: This Aluminum Driveway Gate the entire Gate is a Design, Design are very large and thick with a great flow. Will complement any Architectural look of your home. Can be made in wrought Iron but we recommend Aluminum. This Driveway Gate is made in Aluminum but can also be made Wrought Iron. Frame is 2"x 2" at bottom and sides,the center has a large spear at top (Final), there is another horizontal set at 12" from the bottom also 2"x 2" between this horizontal and the Gate frame is a plate 1/4"x 10" This plate will prevent your Pet to exit Thur the Gate or other Pets to come in, in the plate there are buttons as Design. The main body of the Gate Design is 3/8"x 1" solid plate with a round finish at the end of each Design. If you need a Gate Operator make sure to check out All the Brands that we have available. |
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
|