
| L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0419 |

|
|
| Electromechanical Operator For Swing Gates A MODEL FOR EVERY NEED •Multiple installation possibilities thanks to the optional articulated arms (BLE5 or BSE5) which allow the use of the operator on a pillar or in very tight spaces SAFE USE •Crushing prevention guaranteed by the adjustable mechanical clutch GENERAL OUTLINE The E5 model consists of a compact electromechanical gearmotor with minimum overall dimensions which can be installed on any post or pillar thanks to its versatility. Gate locking in the closing position is guaranteed by an electric lock. The reversibility of the gearmotor allows immediate manual manoeuvring of the gate in case of emergency, by means of the appropriate personalised key releasing the electric lock. Total anti-squash safety is provided by a multiple-disk clutch and the end-of-stroke operation is set by a timer. |

| Control panel | RIGEL 4 UL/CSA (suggested) |
| Reversible/irreversible operator | reversible |
| Power supply | 120 V 60 Hz single-phase |
| Absorbed power | 0.3 hp (200 W) |
| Thermal protection | integrated |
| Opening and Closing Time | 22 s |
| Impact Reaction | mechanical clutch |
| Lock | electric lock |
| Manual Release | reversible operator |
| Operating cycle | semi intensive use |
| Environmental conditions | from 5°F (-15°C) to 140°F (+60°C) |
| Degree of protection | IP44 |
| Operator weight | 17 lb (~8 kg) |
| Dimensions | see below |


| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |