STANDARD FEATURES: • TEC 4 display provides 4 lines and 4 names per directory screen. • Displays are backlit and visible in bright sunlight . • Two entrance control with 2 relays. • Non-volatile memory. • Dials Touch ToneTM or pulse. • Talk time programmable, 1 to 99 minutes. • Remote relay activation and latching. • Programmable door open and alarm time. • Remotely activated speaker and microphone via touch tone after passcode. • Programmable “strike out” for PIN attempts. • Programmable via keypad. • Mutes tones while dialing. • Postal lock capability. • Programmable open keypad for voice mail. • Remotely activated speaker and microphone. • Programmable code and PIN lengths, 1 to 6. • REX (request to exit), alarm shunt and door sense input. Multi-level surge suppression protects all electrical connections. Must be grounded.
Options:
• 56K Baud modem with TEC Basic software package. • NIC, network interface card provides a TCP/IP interface for network programming. • OPTKC125 to OPTKC2000 card reader capability, includes two reader input board. • OPTK4DR is a plug-on board for expanding the TEC II and TEC IV from 2 reader inputs to 4 reader inputs. • RS232 or current loop serial communications. • Semi-Flush mount ring. • Door sense input & alarm shunt output relay. • CCD black & white or color cameras. • Clock calendar. • Selcom Secured™ software for access control programming. • Special finishes available upon request. • Pedestals and pedestal adapters
|
Capaacity:
• Up to 2,000 phone numbers. • Up to 2,000 PIN codes. • Up to 2,000 cards (option). • Up to 4 entrances, (2 entrances standard) • 4 TEC4's may share one phone line using MUI’s (one each) and all can be programmed remotely. • Programming for Windows XP or Vista using either TEC Basic or Selcom Secured™ (option). Compatibility for NT (single user) is provided with Selcom Secured™. • Code / Phone / Card capacities can be upgraded by the factory, through authorized dealers only.
Specifications:
TEC4: • Dimensions: 9 1/2'” W x 13 1/2” H x 3 1/8” D semi flush mount:: 14 5/8” W x 18 5/8” H • Material Used: Housing- 12 ga. structural aluminum; Door- 16 ga.stainless steel • Finish: aluminum back box: Painted weather resistant finish. • Power Input: 18 VAC, 40 VA UL listed transformer (provided with unit). • Modem: 56 kBaud (option) • Emergency Battery: 12V .7 AHR GEL CELL on constant charge (for control of line voltage variation and short term telephone support only, optional). • Telephone Line: Standard voice grade RJ11C Jack. • Mounting: Surface, flush or pedestal mount. • Memory Type: Non-volatile. • Tone Detection: Crystal controlled, capable of detecting short burst 50MS DTMF tone. • Shipping Weight: Approx. 15 lbs. GENERAL: • Operating Environment: Temp.: -20º to 60º C, Relative humidity: 5% to 95% non-condensing. • Relay Output: Form A/B dry contact 24V @ 3AMP. • FCC Reg.: #CPW74F63331MTE. • ARL LISTED (UL Equivalent)
|