| Power Master Gate Operatos and Openers |
| L.A. Ornamental |
| Gate Openers and Operators |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| RECOMMENDED CAPACITIES OF MODEL VS-GSLG |
| L.A. Ornamental |
| One of the nation's foremost manufacturers of commercial and residential gate and door operating systems, OSCO provides quality automatic openers for the fencing, parking, ornamental iron and garage door industries. |
| 3708 N.W. 82nd Street Miami Florida 33147 305-696-0419 Fax: 305-696-0419 |
| Mail To: laornamental@aol.com |
| MODEL |
HP |
Voltage-Single Phase (Voltage-Three Phase) |
Drive Type |
Maximum Gate Length |
Maximum Gate Weight |
Gate Speed |
Maximum Cycles |
| VS-GSL G-2 |
1/2 |
115/208/230V (208/230/460V) |
#50 roller chain |
45ft |
1100lb |
up to 24"/sec |
continuous duty |
| VS-GSL G-1 |
1 |
115/208/230V (208/230/460V) |
#50 roller chain |
78ft |
2500lb |
up to 24"/sec |
continuous duty |
| VS-GSL G-7 |
2 |
115/208/230V (208/230/460V) |
#50 roller chain |
100 + ft |
4000lb |
up to 24"/sec |
continuous duty |
| Cabinet: Weather-resistant galvanized steel cabinet with powder coat finish Lockable, gasket, hinged and removable front cover for easy access Mechanical: Mechanical:Heavy-duty 10:1 right-angle C-face gear reducer - #50 roller chain and sprocket - Adjustable torque limiter - Heavy-duty pillow-block bearings Mounting: 3 - 3 1/2" OD post mounting - Optional pad mounting pedestal available Anti-Entrapment/Detection Devices: Operator is pre-wired to accept contact and non-contact detection devices such as contact edges and/or photo electric eyes. Manual Release: Manual release is easily accessible Control Circuit: Solid state circuit board, 24 VDC - Multiple LEDs for easy setup and troubleshooting - Built in maximum run timer and auto close timer - Right-hand/left-hand easy conversion - Master/Slave - simple three-wire connection Electrical: Variable speed - soft start/soft stop programmable through an inverter motor control (voltage and phase of input power required at time of order) - Available from 1/2 HP to 2 HP industrial continuous-duty, three phase, 56-frame motors - Available in all standard voltages and phases - Maximum run timer for clutch and motor protection Double C-face brake - Power on/off switch - Duplex receptacle on 115 VAC units - Three-button control station included Accessory connections are 24-volt AC or DC - Easily adjustable rotary limit switches - Full system capable for access controls and reversing devices Warning Signals: Warning beeper to sound when gate is moving - Pre-start audio/visual outputs included Dimensions: Width: 30" / Height: 36" / Depth: 12" |